Academic Policies

Academic Integrity

The RMCAD Code of Conduct

As an academic and artistic community, RMCAD seeks to support the development of the highest levels of creativity, growth and learning within each individual. It is our community’s belief that this is accomplished by careful, personal transformation effected through the incorporation of academic and artistic integrity, through a focus and attentiveness to process as well as resultant forms and product, and through acknowledging those upon whose work each is informed and inspired. As citizens of this community, each has the right and duty to expect honest and authentic work from self, peers and all others. Further, RMCAD recognizes that this commitment to integrity is the path of discovering one’s own creative voice and art. Representing the work of others as one’s own damages the creative self and inhibits success toward the goal of authenticity. Thus, RMCAD holds in high esteem this Code of Conduct by which each pledge to abide.

The foundation of a college or university is truth and knowledge. Academic dishonesty is conduct or behavior including, but not limited to cheating, plagiarism, unauthorized possession or disposition of academic materials, falsification, collusion or other forms of dishonesty affecting the academic environment. Other forms of dishonesty include but are not limited to furnishing false information to any College official, faculty member or office; forgery, alteration, or misuse of any College document, record or instrument of identification.

The Code of Conduct also prohibits disorderly conduct in the form of disparagement, harassment, exhibitions of aggression, discrimination, or any behavior that disrupts the learning environment.

Members of the community caught abusing the above standards may be removed from a good standing with the organization until the situation has been resolved by the appropriate RMCAD delegates.

Definitions of Academic Dishonesty:

• Plagiarism is a form of cheating. To plagiarize is “to steal and pass off the ideas or words of another as one’s own, use a created production without crediting the source, commit literary theft, or present as new and original an idea or product derived from an existing source” (Merriam-Webster’s Collegiate Dictionary, 1993). Plagiarism is intellectual theft, a serious academic offense with serious consequences. Plagiarism extends to self-plagiarism, which is the use of one’s own previous work in another context without citing that it was previously used;

• Cheating, which is defined as the giving or taking of any information or material with the intent of wrongfully aiding oneself or another in academic work considered in the determination of a course grade or the outcome of a standardized assessment;

• Presenting the visual media, intellectual property or creative efforts of another as your own; or

• Any other form of inappropriate behavior which may include but is not limited to falsifying records or data, lying, unauthorized copying, tampering, abusing or otherwise unethically using computer or other stored information, violation of any college, state, or federal laws or policies, and any other act or misconduct which may reasonably be deemed to be a part of this heading.

To commit or assist someone in committing academic dishonesty is grounds for disciplinary action and possible suspension or expulsion from the college. Students who observe or become aware of apparent academic dishonesty should report the matter to faculty or administration. Plagiarism is a form of cheating. To plagiarize is “to steal and pass off the ideas or words of another as one’s own, use a created production without crediting the source, commit literary theft, or present as new and original an idea or product derived from an existing source” (Merriam-Webster’s Collegiate Dictionary, 1993). Plagiarism is intellectual theft, a serious academic offense with serious consequences.

Procedures for Addressing Academic Dishonesty

Faculty members are expected to use reasonable and practical means of preventing and detecting academic dishonesty. If a faculty member has evidence that a student has engaged in an act of academic dishonesty, the faculty member will notify the student of the concern and discuss the allegations with the student. The student will be given the opportunity to provide input on the matter. RMCAD faculty reserve the right to submit written works to anti-plagiarism tools to verify the authenticity of student work. If the student admits to the infraction, and the faculty member judges that the preponderance of evidence supports the allegation, the faculty member may then assign an academic penalty.

An initial act of academic dishonesty may result in an “F” for the assignment, at the instructor’s discretion. All incidents of academic dishonesty are reported to the Committee on Plagiarism (COP), overseen by the Dean of Students. The COP who will also notify the Chair of the department in which the course resides, the Chair of the student’s major department, and the Department of Student Advising. Students will receive advisement from the Committee and referral to resources and information to assist in avoiding subsequent offenses. Three or more reported offenses may result in probation or expulsion from the college. Information about incidents of academic dishonesty is kept on file in the Office of Student Affairs. No further action is initiated unless the incident constitutes a major infraction, the student has a prior record of infractions, or there are subsequent reports of misconduct. If the student disputes the decision of the faculty member regarding alleged academic dishonesty, a hearing may be requested through the Conduct Review Board outlined in the Student Policies + Procedures | Student Information  section. The request must be received by the Dean of Students no later than 30 calendar days after the first day of classes of the next term. If no appeal is filed within the time period, then the decision of the faculty member is final.

Academic Advising

Please see The Department of Student Advising  for more information.

Academic Support

Rocky Mountain College of Art + Design offers students additional Academic Support outside of the classroom. For more information, please see the College Resources  section of the catalog for information about the Library, Student Learning Center, TECHBAR and more.

Diversity Within the Curriculum

The curriculum at Rocky Mountain College of Art + Design supports the school’s Mission, Vision, Values, Diversity Statement, and Institutional Outcomes. There are no curricular or educational expectations for any student to personally prescribe to the concepts presented in any class; however, RMCAD does expect students to engage in a variety of academic disciplines that are intended to build skills necessary for informed, meaningful, and critical thinking and engagement. RMCAD requires faculty and students to adhere to the institutional, departmental, and course learning outcomes.

Alternative Curriculum

Alternative curriculum, presentations, readings, assignments and discussion prompts are not available based on race, culture, nationality, ethnicity, religion, ideology, personal beliefs, geographic origins, class, sexual orientation, gender, gender identity and expression, disability, age, and/or personal history.

Accountability

All courses at RMCAD include assessment of student knowledge, capacities, and skills developed in both academic and art and design studio work. Assessment methods and instruments are appropriate for assessing student knowledge, capacities and skills, and the stated learning outcomes of undergraduate and graduate education. The College continually examines and adjusts the content and delivery of curriculum to correspond with expectations of the knowledge, capacities, and skills of students. The Curriculum Committee (CC), the Program Review and Assessment Committee (PRAC), the Program Department, and the Program Department Advisory Boards are responsible for this review and revision process. RMCAD engages in ongoing self-evaluation and modification, consistent with the nature of the art and design fields. Students have direct access to faculty, Department Chairs, and administration to ensure that student needs are known and addressed. Students entering under the current Catalog are subject to the Policies and Procedures of this catalog regardless of the method of course delivery.

Attendance

(all attendance sections updated 6/23/21)

Rocky Mountain College of Art + Design is an attendance taking institution. Attendance is a measure of engagement and interaction that is academically related. Consistent attendance, class participation and thoughtful engagement offer students the most effective opportunities to gain command of the knowledge, skills, and aptitudes for the course of study; therefore, RMCAD students are required to attend class, be prepared to work, and to be on time. The primary goal of attendance is to promote student and faculty engagement, to ensure that students have an opportunity for interaction with faculty and peers regarding academic matters and to provide students with the opportunity to engage with assignments designed to build skill, knowledge and learning partnerships.

Attendance Guidelines

Due to Federal Financial Aid Guidelines, faculty must document all attendance for all students. Campus attendance is entered for each scheduled class on the same day that the course is held and must be posted by midnight mountain time (MT). Online attendance is based on student participation and submissions and is recorded by faculty on Thursdays and Mondays and must be posted by midnight MT.

Students who demonstrate poor attendance, interaction and engagement will be contacted by their faculty member and/or Academic Program Department Chair, and by the Office of Student Affairs and/or the Office of Financial Aid Advising and/or the Office of Academic Advising. Failure to regularly participate in courses may result in being withdrawn from the course, program and college.

RMCAD encourages all students who anticipate an absence at any time to contact their instructor(s). If a student is unable to communicate with their instructor(s), they should contact their Academic Program Department Chair and/or their Academic Student Advisor.

Students should also review their course syllabi for additional attendance requirements which are department specific.

Week One Attendance

Students must participate in and attend class during week one of the term. Students who anticipate missing the first week of class must submit a Policy Appeal petition to the Office of the Registrar seven days before the first day of the term. The College does not guarantee approval of the absence.

Automatic Withdrawal from Courses

The Office of the Registrar will verify all attendance.

Students who have failed to attend class during week one as defined in the attendance policy will be administratively withdrawn from the course. If the student feels that their attendance record inaccurately reflects their attendance, they must contact the instructor and have the instructor verify with the Office of the Registrar that the student was marked as “absent” in  error (see “Unofficial Withdrawal” in Financial Aid for information regarding return of Title IV Funding).

Unofficial Withdrawal

After the Drop deadline students who fail to attend class for a continuous period of 14 days before the Withdrawal deadline will be considered an administrative withdrawal and will receive a “W” assigned by the Office of the Registrar. Students who fail to attend class for a continuous period of 14 days after the Withdrawal deadline will receive an “FN” (Failure for Non-Attendance) grade assigned by the Office of the Registrar (see “Unofficial Withdrawals  ” in Financial Aid for information regarding return of Title IV Funding).

Campus Attendance Procedures

Campus students are considered present when they arrive to the physical or online synchronous class on time (no greater than 15 minutes late) and remain engaged in interaction related to lectures, active learning, assignment completion, discussion, exams, or other academic interactions for the duration of the course period, including prompt return from breaks. Failure to meet the requirements for attendance will result in the instructor marking them absent. Failure to regularly participate in class may result in a lower or failing grade as campus attendance is often directly tied to class participation, application, and understanding. Failure to attend class may also result in being withdrawn from the college.

Online Attendance Procedures

Online students are considered present for mid-week attendance when they log into the LMS and submit completed work for any gradable activity, including discussion posts, that addresses the assignment requirement(s); due that week on Wednesdays by 11:59 PM MT. To be considered present for the end-of-week attendance they must log into the LMS and submit completed work for any gradable activity, including discussion posts, that addresses the assignment requirement(s); after Wednesday at 11:59 PM MT but no later than Sunday at 11:59 PM MT of that week.

For the purposes of attendance recording, late assignment submissions will be counted toward mid-week or end-of-week attendance for the week in which the assignment is submitted, regardless of when it was initially due. Academically related activities that occur outside of the LMS must be recorded within the LMS in order to count toward attendance. Failure to meet the requirements for attendance will result in the instructor marking the student absent. There are no excused absences for the purposes of recording attendance. Failure to regularly attend and participate in class activities and assignments may result in a lower, or failing, grade as online attendance is often directly tied to weighted learning and assessment activities. Failure to regularly participate in class may also result in being withdrawn from the college.

Classroom Disruptions

If a classroom disruption is due to specific student behaviors, faculty have the right to dismiss the student(s) from the class session. If the student(s) refuse to leave upon request, RMCAD Security or the Dean of Students will be called to escort them from the classroom. Instructors are not authorized, however, to remove a student from the course entirely. Student dismissals from a class session will be treated as absences by faculty. The faculty has the authority to enforce consequences for the student’s absence(s), in accordance with the class syllabus. This does not, however, limit the ability of the instructor or a fellow student from reporting or filing formal complaints concerning disruptive behavior occurring within the classroom.

All communications with faculty or other students—whether in class, face-to-face, on paper, or by telephone, email, or other electronic means—are subject to the same standards of conduct, behavior, and discipline as classroom behavior. Standards of conduct are outlined in the Student Code of Conduct  including – Disorderly Conduct, Threatening Behavior, Harassment + Discrimination, Interference, Obstruction, or Disruption, Online Conduct + Written Communication.

Definition of Credit Hour

RMCAD utilizes the guidelines of the US Department of Education as the foundation for the definition of a credit hour:

A credit hour is an amount of work represented in intended learning outcomes and verified by evidence of student achievement that is an institutionally established equivalency that reasonably approximates not less than:

(1) one hour of classroom or direct faculty instruction and a minimum of two hours of out-of-class student work each week for approximately fifteen weeks for one semester or trimester hour of credit, or ten to twelve weeks for one quarter hour of credit, or the equivalent amount of work over a different amount of time; or (2) at least an equivalent amount of work as required in paragraph (1) of this definition for other activities as established by an institution, including laboratory work, internships, practica, studio work, and other academic work leading toward to the award of credit hours. (34 CFR §600.2)

RMCAD courses are offered in an eight-week format for both campus and online programs. RMCAD requires a minimum of 1.875 hours of contact and 3.75 hours of outside work (student study and preparation) per week for eight weeks, or the equivalent, per credit hour.

For on-campus lecture courses, three-credit classes meet on campus for a minimum of 45 hours during a term, with approximately 90 hours of outside work, or the equivalent, and as necessary to achieve the stated course learning outcomes. For on-campus studio courses, three-credit classes meet for a minimum of 87 hours during a term, with approximately 48 hours of outside work, or the equivalent, and as necessary to achieve the course learning outcomes.

For internships and field experience, one term credit hour represents 45 hours of internship or work-related experience. RMCAD does not award credit for short-term workshops or for attendance at meetings sponsored by the college or other institutions or organizations unless such credit is acceptable toward specific programs at our institution.

For online courses, the curriculum mirrors the learning outcomes and academic standards of the analogous on-campus course and requires students to complete the equivalent amount and rigor of work. For example, for a 3-credit course, 135 hours of student work, or the equivalent, are required; for a 2-credit course, 90 hours of student work, or the equivalent, are required. For online courses that do not have an analogous on-campus course, the College establishes standalone learning outcomes and each credit is supported by an equivalent amount and rigor of work as required by College policy and regulatory requirements (45 hours of student learning activities for each unit of semester credit or the equivalent).

The exact number of hours per week an individual student spends on each online course will vary based upon the individual’s study styles, technology proficiencies, learning preferences, and prior experience with course topics.

Grading + Evaluating Student Progress

Cumulative Grade Point Averages

Grade reports reflect standard letter grades. RMCAD uses a 4.0 scale to calculate cumulative grade point averages.

Grading Policies

The policies on late submission of assignments and grading criteria vary by academic department and are clearly stated in the course syllabus distributed during the first week of classes. Every course undertaken at RMCAD is included in computing the grade point average, except those in which an AU (audit), P (pass), R (repeated course), or W (withdraw) is posted.

Grading Scale Point Distribution + Percentages

Students are graded on the basis of prompt and satisfactory completion of assignments, attitude, attendance, and individual progress as outlined within the course syllabus. Students are expected to have materials and supplies necessary for the successful completion of assignments.

Withdrawals

Withdrawals are only accepted before the published deadline of the term (see the Academic Calendar ); they are considered non-punitive and are not computed into the grade point average.

Receiving Grades

Students receive midterm and final term grades via RMCAD’s online student information system CampusVue. Final grades are posted to the student portal within one week of the end of the term. Students who are unable to access their grades by the end of the first week of the following term should contact the Office of the Registrar. The Financial Aid Office notifies Student Advising of Unsatisfactory Academic Progress.

Grade Appeal Procedure

Faculty are responsible for stating clearly the instructional objectives of the course at the beginning of each term and for evaluating student achievement in a manner consistent with the stated objectives. Students are responsible for maintaining standards of academic performance established in the syllabus for each course in which they are enrolled.

The grade appeal procedure provides a formal process for students to request a review of final course grades they think were incorrectly awarded. Individual assignment grades are not eligible for this appeal procedure. The student must formally petition for a grade appeal to the instructor in writing, using the RMCAD Grade Appeal Form. The required form is available from the Office of the Registrar.

The burden of proof rests with the student to demonstrate the grade assigned for the course was made on the basis of any of the following conditions:

• A grading decision was made on some basis other than performance and other than as a penalty for academic dishonesty.
• A grading decision was based on standards unreasonably different from those which were applied to other students.
• A grading decision was based on a substantial, unreasonable, or unannounced departure from the course objectives and assignments.
• Grade appeal petitions will only be considered for the final grade awarded for the course.
• Grade appeal petitions may result in a lower grade than initially awarded by the individual instructor.

The student must submit a grade appeal, in writing, to the instructor who issued the grade, no later than 30 calendar days after the first day of classes of the next term.

If, after subsequent consultation with the instructor, the student is not satisfied and wishes to pursue the issue, or if the instructor is not available or does not respond within 14 days, the student should submit an appeal, in writing, to the Department Chair in which the course was taught. Documentation supporting the grade change based on the appropriate category(ies) set forth above is to be submitted with the appeal. If no appeal is filed with the Department Chair within 45 calendar days after the first day of classes of the next term, the grade shall be considered final.

The Department Chair will discuss the matter with the student and with the instructor and will document the appeal and the Chair’s response.

If the student is not satisfied with the Department Chair’s response and wishes to pursue the matter further, the student should submit an appeal in writing to the Instructional Affairs Committee (IAC) within 14 days from the receipt of the Chair’s response. Again, all documentation supporting the appeal should be included. The IAC may request additional information from the student, faculty member, and Chair. The IAC will review the submitted documentation and recommend approval or denial of the appeal.

The IAC will document the decision and provide copies to the student, the instructor and the Chair.

This decision of the IAC is submitted to the Dean of Students for approval. This decision is final.

The result and documentation of the review will be compiled by the Registrar and placed in the student’s academic file.

If the student deems the final decision and accompanying evaluative comments are inaccurate, misleading or a violation of the privacy or other rights of the student, the student may insert a written comment in the record.

Incomplete Grades

In extenuating circumstances an “I” grade may be assigned by the instructor with permission from the Department Chair, and in accordance with the eligibility requirements set forth below. Students may request an “I” grade for more time to complete required coursework, which the student was prevented from completing in a timely way due to non-academic reasons. Students will be asked for documentation to justify the request, though it is important to remember that such documentation does not automatically validate the request. Other circumstances may be taken into consideration, such as the pattern of performance and participation in the course, and any additional factors that the instructor deems relevant. To be eligible for an “I” grade, students must be passing the course at the time of the request and must have completed at least 75 percent of the coursework up to week 6 as specified in the syllabus. The Incomplete Grade Petition form must be submitted to the Office of the Registrar by the Friday of week six in an 8-week term.

All “I” grades require a Incomplete Grade Petition specifying the remaining coursework required for completion and timeline for removal of the “I” grade. This agreement is subject to the approval of the instructor and the Chair of the department or program. If the coursework is not completed within the prescribed time frame, the “I” will change to the earned grade in the course, including the outstanding coursework. The maximum time in which students must complete all coursework is no later than the Friday of week four of the next term. Students cannot have more than one outstanding “I” before enrolling in the next session. Financial aid disbursements scheduled for the following semester will be delayed until the “I” grade is updated to reflect a final grade for the course.

Eligibility Requirements

A student who has suffered a death in the family or other personal event of sufficient seriousness to prevent the student from completing coursework and who has successfully completed 75% of the coursework up to week 6 as specified in the course syllabus, is eligible to petition for the grade of incomplete to the instructor. An eligible student must follow the procedures stated below or negate eligibility.

Because of federal financial aid rules, students who are on academic probation cannot petition for or receive a grade of Incomplete under any circumstances.

Students who are graduating seniors cannot receive a grade of Incomplete and graduate. An incomplete grade automatically postpones graduation.

No extensions or second incomplete petitions can be accepted in relation to the original agreement. In the event that the instructor and Chair deny the petition for an incomplete grade, the student may submit a petition to the Dean Students. The Dean will confer with the instructor and Chair and may require additional documentation and information to substantiate the petition over and above what was previously submitted and will render a final decision.

Procedures

The student must formally petition the instructor in writing for the grade of Incomplete, using the RMCAD Incomplete Grade Petition form. The required form is available through the Office of the Registrar. The petition is a contract stating the make-up work to be completed and a completion date, and must be signed by the instructor, the student, and the Department Chair.

It is the student’s responsibility to initiate the petition and obtain the signatures required. The student must submit the completed form to the Office of the Registrar for approval of the Incomplete.

Approvals are not granted to incomplete or late RMCAD Incomplete Grade Petition forms.

Students must complete and submit to the instructor all work by the Friday of week four of the next term.

The instructor must submit the final grade to the Office of the Registrar by the Friday of week five of the following term. All due dates stated on the incomplete petition must be met. If they are not, the “I” grade will automatically change to the earned grade in the course. There will be no exceptions.

Policy Appeal

RMCAD approves policy appeals under rare and extraordinary circumstances. To request a policy appeal, students submit the Policy Appeal Form, including the appropriate situational evidence and/or documentation, available through the Office of the Registrar and submitted no later than the end of the following term. The College does not guarantee the approval of policy appeal petitions. All policy appeals are reviewed by the Dean of Students. Decisions are final and binding.

Graduation Requirements

Undergraduate

In order for a student to graduate from a bachelor’s degree program at Rocky Mountain College of Art + Design the student must:

• Complete all required courses in a given program of study.
• Have at least a 2.0 cumulative grade point average (2.5 for Art Education majors).
• Have earned a minimum of 120-126 term credits, depending on their program, for a bachelor’s Degree. A minimum of 30 credits must have been earned at RMCAD, including the final 15 credits of study, which must be completed at RMCAD (active military students are exempted from the residency requirement).
• Have completed a minimum of two portfolio reviews for the BFA degrees.
• Have an acceptable body of work for a graduation exhibition for the BFA degrees.

Graduate

In order for a student to graduate from a Master of Arts degree program at Rocky Mountain College of Art + Design the student must:

• Complete all required courses in a given program of study.
• Have at least a 3.0 cumulative grade point average.
• Have earned a minimum of 30 credit hours for a Master of Arts Degree (refer to specific degree requirements). At least 24 credit hours including capstone courses such as thesis, portfolio, or applied project must have been earned at RMCAD. A maximum of 6 semester hours of transfer credit will be accepted toward completion of graduation requirements.

Graduation Honors

Undergraduate students who maintain a high level of scholastic excellence throughout their college career receive the earned degree with honors. Honors are determined by the student’s cumulative grade point average.

Cum Laude: 3.5 – 3.6 Cumulative GPA
Magna Cum Laude: 3.61 – 3.79 Cumulative GPA
Summa Cum Laude: 3.80 – 4.0 Cumulative GPA

Graduate students who maintain a high level of scholastic excellence throughout their college career receive the earned degree with honors. Honors are determined by the student’s cumulative grade point average.

Passed with Distinction: 4.0 GPA

Honors designations on transcripts are based upon the student’s complete academic record at RMCAD. Only credits earned at RMCAD are used to determine a student’s grade point average. Students whose grade point average qualifies them for graduation with honors the term before they graduate will be recognized at the commencement ceremony.

Valedictorian

One Valedictorian will be chosen to represent their graduating class as the student who best symbolizes RMCAD academically. The Valedictorian will be a student who has achieved a 4.0 GPA, or who has achieved the highest cumulative GPA among their graduating class.

In the event there are multiple students who fit these criteria, the student with the most credits earned at RMCAD will be awarded the honor. Should multiple students have the same CUM GPA and credits earned at RMCAD, the student’s conduct, civic engagement, and community involvement history will be reviewed. The student with a demonstrable history of campus and civic engagement and a history clear of conduct violations will be selected as valedictorian.

Eligibility for Participation in Graduation Events

BFA Students are eligible to participate in commencement exercises and the RMCAD Graduation Exhibition only if they have completed all of the degree program requirements and are officially graduating in the same term. Students are added to the graduation list when they have attended the Mandatory Grad Meeting and have completed requisite paperwork and submitted relevant information, found within the Mandatory Grad Meeting, provided by the Office of the Registrar. Each semester, all on-campus graduating BFA students have the opportunity to participate in an on-campus exhibit. The BFA Graduation Exhibition is a college tradition and a privilege that brings all students, faculty, staff, and community together for a celebration of the talent and hard work of the graduates. Participating students must be present for the installation and exhibition of the show. Online students who are unable to participate in the on-campus exhibition are invited to have their work included in an online exhibition that will also be exhibited in the on-campus exhibit.

Graduation Rates

The current retention rate for Rocky Mountain College of Art + Design is 58% percent for full-time first-time freshmen who started in the fall term of 2017. This retention rate is comparable to that of other schools of similar size and focus.

The current six-year average graduation rate for Rocky Mountain College of Art + Design is 41% percent for full-time first-time freshmen who started in the fall term of 2012. This graduation rate is comparable to that of other schools of similar size and focus. Four-year average for the Student Right-to-Know completion or graduation rate-calculation is 45%.

Honor Roll

Undergraduate students must be enrolled full-time to be eligible for honors. Students who begin a term as full-time but withdraw from one or more courses resulting in less than full-time status for a term are ineligible.

Honors are determined by the term grade point average requirements as follows:

• Dean’s Honor Roll: 3.5–3.99
• President’s Honor Roll: 4.0

Liberal Arts Policy

First-Time Freshman

RMCAD students are scheduled for courses based off of the program sequence that is designed by the Office of the Registrar and the Academic Program Chair. The program sequence was written to distribute liberal arts, foundations, and core program requirements over the lifetime of a student’s program in order to create a well-rounded student learning experience both online and on campus. The program requirement sequence also ensures that students establish the necessary skills and knowledge to succeed in courses throughout the development of their degree program. RMCAD strongly believes that the liberal arts and foundations course work is as important to the development of strong artists as their core program coursework. Students are encouraged to follow degree sequence plans as closely as possible. Students deviating from the prescribed sequence may not be able to progress in their program until key requirements are fulfilled.

Transfer Students

Transfer students are also required to complete all liberal arts coursework in a timely manner. RMCAD requires 33-45 credit hours of liberal arts coursework and transfer students may often transfer in some of the required courses. Students are encouraged to follow degree sequence plans as closely as possible. Students deviating from the prescribed sequence may not be able to progress in their program until key requirements are fulfilled.

Portfolio Reviews

RMCAD students enrolled in the BFA programs are required to pass a minimum of two portfolio reviews as a part of RMCAD’s regular assessment of student outcomes.

The sophomore portfolio review (FD 2300 Foundations Sophomore Portfolio Review) is scheduled when the student has earned 45-60 credits. Transfer students will be required to complete Sophomore Portfolio Review regardless of the number of transfer credits awarded. Students prepare and present a portfolio demonstrating their mastery of foundational skills. The review is pass / fail and is required for students to move into their major 3000-level coursework.

All BFA students are required to complete a second and third, major-specific portfolio review during the student’s junior and senior year. Please see major-specific course descriptions.

Students who fail either Sophomore Portfolio Review or their Major Specific Portfolio Reviews must schedule and retake the portfolio review the next time it is offered. Students who fail a second attempt must register for the portfolio review in the next semester and will not be allowed to advance into upper-level coursework until they pass.

Intellectual Property and Copyright

Institution’s Marks

Students and employees are not permitted to use any materials, or to register, or seek to register, any trademark, service mark, domain name, trade name, or corporate name that includes or is confusingly similar to any of RMCAD’s trademarks, trade names, service marks, copyrights and copyrightable works, trade secrets, or other proprietary information, or any derivative thereof, in any manner or media, without express written consent from the RMCAD President permitting the use of such Intellectual Property.

For example, students are prohibited from securing, registering, or creating any website, email address, blog, or social media address or account that uses or refers to any RMCAD Intellectual Property; from submitting, sharing, displaying, or uploading any Intellectual Property (including video, graphics, and other content found on public websites maintained by RMCAD and its affiliates) to or on any website, social media website, video-sharing website, or any other media content- sharing website.

Use of College Name and/or Logos

Students, faculty and staff may use the College name and logos to identify themselves. Only with the express written permission of the College may the College name or logos be used by individuals or entities in a manner that implies College endorsement or responsibility for particular activities, products, or publications for commercial purposes or promotion of individuals or groups.

Perpetual License

Artwork and projects created by students as part of a RMCAD course of study are done for educational purposes and represent both the student’s ideas and the influence of the College’s faculty. The college reserves the right to display, retain, and reproduce student work for exhibition, publication, marketing, or any other purpose without the student’s consent. Use of these materials by RMCAD will be limited to promotional and education activities for the benefit of the school and its students.

Students agree to grant Rocky Mountain College of Art + Design (RMCAD) perpetual license to all materials created in the course of a school project or activity including but not limited to art, i.e.: paintings, drawings, design, illustration, animations, character design, images, video, film, computer media, audio recordings, and other creative work created in the course of a school project or activity.

Students hired to carry out specific tasks that contribute to Intellectual Property of RMCAD retain no rights of ownership in whole or in part to that Intellectual Property or to the Student’s contribution to that work. RMCAD also reserves the right to use students’ likeness and/or voice in RMCAD advertising or promotional pieces.

Copyright Compliance

RMCAD is committed to complying with all applicable laws regarding copyrights. As an institution devoted to the creative process, RMCAD supports the responsible, good faith exercise of full fair use rights as codified in federal law at 17 U.S.C. § 107 by faculty, librarians, staff, and students in teaching, research, and service activities. Except as allowed by law, it is a violation of this policy and law for RMCAD faculty, staff, or students to reproduce, distribute, display publicly, perform, digitally transmit (in the case of sound recordings or audiovisual works), or prepare derivative works based upon a copyrighted work without the permission of the copyright owner.

Students who engage in illegal downloading or unauthorized distribution of copyrighted materials using the school’s information technology system are subject to disciplinary action under the Student Code of Conduct  up to and including dismissal from their program. In addition, consequences for copyright infringement can include civil and criminal penalties. In general, anyone found liable for civil copyright infringement may be ordered to pay either actual damages or “statutory” damages affixed at not less than $750 and not more than $30,000 per work infringed. For “willful” infringement, a court may award up to $150,000 per work infringed. A court can, in its discretion, also assess costs and attorneys’ fees. For details, see Title 17, United States Code, Sections 504, 505. Willful copyright infringement can also result in criminal penalties, including imprisonment of up to five years and fines of up to $250,000 per offense. For more information, please see the website of the U.S. Copyright Office at www.copyright.gov. Students who engage in illegal downloading or unauthorized distribution of copyrighted materials using the school’s information technology system are subject to disciplinary action under the Student Code of Conduct up to and including dismissal from their program.

As a general guideline, students are permitted to use copyrighted materials in their projects/assignments. However, fair use only permits the use of the copyrighted material for course work/assignments. If a student’s course work contains any copyrighted material, the student is not permitted to use that work in a portfolio, demo reel, website, or anything outside the scope of that specific course assignment.

The information provided above is not intended to provide legal advice but instead clarification of the federal statutes as understood by RMCAD. Faculty and staff should refer to the National Employee Handbook and the Academic Affairs Manual for additional information regarding copyright regulations and requirements.

Repeating Courses

RMCAD allows students to repeat a class in which they have received a failing grade (F, FN) or have withdrawn from the course (W). Students are required to take the class again in the next term that it is offered. Credit is earned for the course only once and students will keep the highest grade obtained when repeating a class. The lower grade for the particular course will be removed from the GPA calculation but will remain on the transcript and the retaken course annotated with the grade suffixed with “**”—ex: C**. 

Additionally, the credits will be included in the total attempted credits that may impact a student’s satisfactory academic progress . Students who are using Financial Aid and/or VA benefits will be impacted after the third attempt according to the federal guidelines which state students receiving Financial Aid and/or VA benefits can only have 3 attempts in the same course.  If the student enrolls in a repeated course for a fourth time, this course will not be eligible for Financial Aid and tuition must be paid in cash. This rule applies whether or not the student received aid for earlier enrollments in the course. This will in most cases affect the student’s graduation date. Students that are on their second attempt will receive a warning from the Financial Aid Department prior to the start of their attempt. Additionally, these students will be required to meet with the Student Learning Center (SLC) to ensure they have the proper academic support.